Chef’sChoice 15XV Electric Knife Sharpener Review: Fast 15-Degree Edges
KitchAdvisor is reader-supported. As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.
The Chef’sChoice 15XV EdgeSelect Professional Electric Knife Sharpener is the best choice if you want very sharp knives fast with almost no skill required. Its three stages use 100 percent diamond abrasives and a stropping stage, and spring-loaded guides hold every knife at the correct angle automatically.
It is designed to convert standard 20-degree edges into sharper 15-degree Trizor XV edges, and it can also refresh serrated knives. It costs more than manual sharpeners and removes metal faster, so it needs a light touch. Below we explain how it works, who should buy it and how it compares with manual options.

Reviewed Product
Chef'sChoice 15XV EdgeSelect Professional Electric Knife Sharpener
Rating: ★★★★½ 4.6/5
Research-based editorial score from verified specs, materials, design and buyer-use factors.
Best For: Busy households with a full block of knives that want fast, consistent, very sharp edges.
Key Specs
3-stage electric sharpener • Stages 1 and 2: 100% diamond abrasives • Stage 3: stropping/polishing • Converts 20° factory edges to 15° Trizor XV edges • Patented flexible spring angle guides • Straight-edge and serrated blades • Simple on/off switch • About 1 minute for first sharpening • About 10 x 4.25 x 4.25 in • About 4.2 lb
Key Advantage
Fast, foolproof sharpening to a very sharp 15-degree edge for a whole block of knives.
Main Trade-off
Removes metal faster than manual systems, and it is a premium-priced appliance.
Quick Verdict
Chef’sChoice is one of the best-known names in electric knife sharpeners, and the 15XV is its flagship for home use. Inside are three stages. Stages 1 and 2 are plated with 100 percent diamond abrasives to sharpen and refine the edge, and stage 3 is a stropping stage that polishes it to a fine finish.
The main selling point is the Trizor XV edge. Most Western kitchen knives leave the factory with roughly 20-degree edges. The 15XV converts them to 15 degrees, which cuts with noticeably less resistance. Chef’sChoice says the first conversion takes about a minute per knife, and later touch-ups are much quicker.
Flexible spring guides automatically position the blade at the correct angle, so you simply pull the knife through each slot with light pressure. That makes it one of the easiest ways to get consistent results on every knife in your block, including Japanese-style knives that already use 15-degree edges. Stage 3 can also be used to refresh serrated knives.
Pros
- Very fast sharpening
- Consistent 15-degree edges
- 100% diamond abrasives
- Handles straight and serrated blades
- Almost no learning curve
Cons
- Premium price
- Removes more metal than manual systems
- Fixed 15-degree angle only
- Takes up counter or cupboard space
How It Compares
| Sharpener | Type | Angles | Speed | Best For |
|---|---|---|---|---|
| Chef’sChoice 15XV | Electric, 3-stage | 15° | Fastest | Many knives, little effort |
| Work Sharp Precision Adjust Elite | Guided manual | 15°-30° | Moderate | Precision and control |
| Tumbler Rolling | Rolling, diamond | 15° / 20° | Moderate | Gentle, easy manual |
| Kitchellence 3-Stage | Pull-through | Fixed | Fast | Budget |
| AccuSharp | Handheld carbide | Fixed | Fast | Touch-ups |
How the Three Stages Work
Stage 1: Diamond sharpening
The coarsest diamond stage creates the new 15-degree bevel. Use it when converting a knife for the first time or when an edge is very dull or damaged. Skip it for routine touch-ups.
Stage 2: Diamond honing
A finer diamond stage refines the edge, creating a second, slightly larger bevel. This is the stage most touch-ups start with.
Stage 3: Stropping and polishing
The final stage polishes the edge and removes the tiny burr left by sharpening. Use it on its own for quick refreshes and for serrated knives.
How to Use It
- Place the sharpener on a stable, dry surface and switch it on.
- Insert the knife into the left slot of the stage, near the handle, and pull it through toward you at a steady pace, about 3 to 4 seconds for an 8-inch blade.
- Alternate between the left and right slots for an equal number of pulls.
- Use very light pressure; the springs do the work.
- Move from stage 1 to 2 to 3 for a full sharpening, or use stage 2 and 3 only for touch-ups.
- Wipe or wash the blade to remove metal particles before using it on food.
Why a 15-Degree Edge?
Edge angle is measured on each side of the blade. A 15-degree edge is thinner than a 20-degree edge, so it slides into food more easily. Tomatoes, onions and herbs cut more cleanly, and you need less force for dense vegetables.
The trade-off is that a thinner edge can roll or chip a little sooner on hard tasks. For most home cooking, the extra sharpness is worth it, and with the 15XV a touch-up only takes a few seconds per knife. If you prefer to choose your own angle, the Work Sharp Precision Adjust Elite offers 15 to 30 degrees.
Signs Your Knives Need Sharpening
Most home cooks wait too long to sharpen. Watch for these signs, and use stage 3 for a quick refresh before a knife gets truly dull:
- The knife slides off tomato or pepper skin instead of biting in.
- Onions crush instead of slicing cleanly.
- You have to press hard to cut carrots or squash.
- The knife will not slice cleanly through a sheet of paper.
- You see a thin bright line along the edge when looking straight down at it under light.
Which Knives Can You Sharpen?
- Western chef knives, santokus, utility and paring knives (converted to 15 degrees).
- Japanese-style knives that already use roughly 15-degree double-bevel edges.
- Serrated bread and steak knives, using stage 3 only.
- Avoid single-bevel Japanese knives, scissors and very thick cleavers, which need other tools.
Tips for the Best Results
Before sharpening, wash and dry the knife so grease and food do not clog the abrasives. Hold the handle level and let the springs guide the blade; do not twist or tilt it. Keep the same number of pulls on each side so the edge stays centered.
After a full sharpening, a few quick pulls in stage 3 every week or two keep the edge keen for months. A simple routine like this reduces how often you need the coarser stages, which helps your knives last longer.
Who Should Buy It (and Who Should Skip It)
Buy it if you have a full block of knives, want them sharp with minimal effort, or have tried manual sharpeners and never got consistent results. It is also helpful for cooks with limited hand strength or dexterity.
Skip it if you own valuable single-bevel or very hard Japanese knives, prefer to control the angle yourself, or only own one or two inexpensive knives. Our best knife sharpener guide covers simpler and cheaper options.
Electric vs. Manual Sharpeners
Electric sharpeners are fastest and most consistent for people who do not want to learn technique. Manual guided and rolling systems are slower but remove less metal and give more control.
Many cooks use both: an electric sharpener for everyday knives and a manual system or professional service for special knives.
Is It Worth the Price?
If you sharpen a whole block regularly, yes. Compared with paying for professional sharpening several times a year, it can pay for itself, and it keeps every knife consistently sharp.
Sharp knives are safer and more pleasant to use. Pair it with a dependable knife like the Victorinox Fibrox Pro or the Mercer Genesis for a low-maintenance setup.
Care, Safety and Common Mistakes
- Do not press down hard. Heavy pressure removes extra metal and can overheat the edge.
- Do not use stage 1 for routine touch-ups; start with stage 2 or 3.
- Pull the blade through at a steady speed and keep it level.
- Clean out metal filings from the unit as directed in the manual.
- Unplug before cleaning and keep the unit dry.
- Wash knives after sharpening to remove metal dust. See our knife and cut safety guide for safe handling of freshly sharpened blades.
Frequently Asked Questions
What angle does the Chef'sChoice 15XV sharpen?
15 degrees per side, which Chef’sChoice calls the Trizor XV edge.
Can it sharpen serrated knives?
Yes. Use stage 3 to refresh serrated blades.
How long does it take to sharpen a knife?
About a minute the first time you convert a knife to 15 degrees; later touch-ups take seconds.
Will it work on Japanese knives?
It works on double-bevel Japanese-style knives with about 15-degree edges. It is not for single-bevel knives.
Does it remove a lot of metal?
Stage 1 removes metal quickly, so use it only when needed. Stages 2 and 3 are gentler.
Is an electric knife sharpener safe for good knives?
Yes, with light pressure and correct stage use. Many cooks still prefer manual systems for very expensive knives.
Final Verdict
The Chef’sChoice 15XV EdgeSelect is one of the fastest and easiest ways to keep a whole block of knives very sharp, with diamond abrasives, a stropping stage and automatic angle guides.
Use it with a light touch and start at the finest stage that works. If you want full angle control, choose the Work Sharp Precision Adjust Elite instead. For background on sharpening methods, see the knife sharpening article on Wikipedia.
Related reading: